COATINGS
PAINT CERAMIC COAT
ZviZZer Paint Ceramic Coat is the hardest hybrid silicon / polymer hard coating from ZviZZer and is designed to protect paint surfaces optimally and permanently, with moderate workload. The molecular matrix structure forms a wafer-thin anti-adhesive layer that is strong and hard in its capacity.
The high-performance particles combine chemically with the surface and settle on the paint pores. They form after curing a high gloss protective layer. This very simple way of surface optimization protects the paint from damage such as oxidation, salt, acids and insects.
Due to the coating with ZviZZer Paint Ceramic Coat, the clear coat becomes harder and scratch-resistant (about 60-65%) than conventional paints thanks to the high-performance particles on the surface. In particular, the new environmentally friendly, water-soluble paints are very soft in their composition. Even if you only wash your vehicle by hand, after some time, corresponding signs of wear and tear develop. With ZviZZer Paint Ceramic Coat, these are minimized or even prevented.
ZviZZer Paint Ceramic Coat prevents corrosive and acidic products in the pH range of 3-12 from attacking the clearcoat. ZviZZer Paint Ceramic Coat guarantees that painted surfaces retain their original appearance over time. The product is yellowing and abrasion resistant. The product docks directly to the paint molecule, improves the surface in its dirt-repellent property and forms a wafer-thin anti-adhesion protective layer. ZviZZer Paint Ceramic Coat deepens the shine and color of the surface extremely.
How to use Glass Coat
Wash Applicator Cloths as well as all microfiber cloths prior to using them. All accessories have to be dry when used.
APPLICATION
- Prepare the surface using CLEAN TOP.
- Wrap the application cloth around the applicator.
- Apply 12-18 drops of product to the application cloth and apply quickly and evenly to the surface until a film is visible. Follow this step on small surface sections no larger than 60 cm x 60 cm.
- Leave the product to evaporate for 1-3 minutes or polish immediately.
- Remaining product residue can be removed using a microfibre cloth. Start at the edges of the coating and work inwards using straight and rapid movement.
- Using a clean microfibre cloth polish the surface. Start at the edges of the coating and work inwards using a circular motion; do not over apply pressure to the surface during this operation.
- Any visible smearing can be polished out using a microfibre cloth (5 Pack), check the surface with a light source to ensure quality control of the application.
- Should a higher level of protection be required, then after 25 minutes an additional coat can be applied, do not wait longer than 40 minutes to perform this additional coating operation.
PAINT CERAMIC COATING BOX
SPRAY COAT
ZviZZer SPRAY COAT is a specially developed longlasting silicone free spray coating for all external surfaces, such as paint, plastic and glass found on vehicles, caravans and yachts. ZviZZer SPRAY COAT is easy and quick to apply and provides excelent results and a high hydrophobic effect. ZviZZer SPRAY COAT deepens the shine and the colour depth of the surface. ZviZZer SPRAY COAT can also be used for after care maintenance of vehicles, which are already sealed with our surface protection systems. Thus extending the service life of the coating. Can be applied in multiple layers.
Application rate: 3 to 5 ml per m²
Processing temperature: + 5 ° C to + 30 ° C
Storage and shelf life: at least 12 months at room temperature in tightly closed original containers.
Storage temperature: + 10 ° C to + 25 ° C
FRESH UP COAT
ZviZZer FRESH-UP COAT is a specially developed silicone free spray coating for all as-new smooth external surfaces, such as paint, plastic and glass found on vehicles, caravans and yachts. ZviZZer FRESH-UP COAT is very easy and quick to apply and provides excellent results and a high hydrophobic effect. ZviZZer FRESH-UP COAT deepens the shine and the colour depth of the surface. ZviZZer FRESH-UP COAT can also be used for after care maintenance of vehicles, which are already sealed with our surface protection systems. For extending the service life of the coating.
APPLICATION
- Spray the product thinly on the surface and polish with the application cloth until you achieve a high-gloss and streak-free result.
- Excess material or light streaks can be polished later with a fresh microfibre cloth.
Application rate: 3 to 5 ml per m²
Processing temperature: + 5 ° C to + 30 ° C
Storage and shelf life: at least 12 months at room temperature in tightly closed original containers.
Storage temperature: + 10 ° C to + 25 ° C
CLEAN TOP
Special surface cleaner for the neutraisation of painted plastic and glass surfaces before sealing. Can also be used for leather surfaces in moist condition.
Usage
10-15 ml / m²
Application Temperature
+5° C to +35° C
Storage and Shelf Life
at least 12 month at room temperature sealed in tis original container
Storage temperature
+10° C to +25° C
WAXES
WAX - SYNTHETIC
APPLICATION
For an optimal result, the painted surface should be cleaned using CLEAN TOP. Afterwards apply the WAX to the entire vehicle and then leave it for 20-40 minutes to allow the product to be absorbed, and then buff the entire vehicle to the required finish. The WAX will become weatherproof between 4-6 hours after application. Applicable for all painted surfaces.
WAX - NATURAL
APPLICATION
For an optimal result, the painted surface should be cleaned using CLEAN TOP. Afterwards apply the WAX to the entire vehicle and then leave it for 20-40 minutes to allow the product to be absorbed, and then buff the entire vehicle to the required finish. The WAX will become weatherproof between 4-6 hours after application. Applicable for all painted surfaces.
WAX - GRAPHENE
APPLICATION
For an optimal result, the painted surface should be cleaned using CLEAN TOP. Afterwards apply the WAX to the entire vehicle and then leave it for 20-40 minutes to allow the product to be absorbed, and then buff the entire vehicle to the required finish. The WAX will become weatherproof between 4-6 hours after application. Applicable for all painted surfaces.
SAFETY PRECAUTIONS
We recommend to use Nitril-gloves for protection of your skin!
Wash Applicator Cloths as well as all microfiber cloths prior to using them. All accessories have to be dry when used.
Keep away from heat, hot surfaces, sparks, naked flames and all other sources of ignition. Do not smoke when using the product. Keep the container closed tight. Always wear appropriate safety clothing and eye protection. After use always wash your hands. Should the product come in contact with your eyes then rinse your eyes for at least one minute with clean water. If using contact lenses then remove them, ensuring that your fingers are clean, and rinse your eyes for a further one minute with clean water. If the eye irritation persists then seek immediate medical attention. Seek help when the product has come in contact with skin or hair. All contaminated clothes must be removed immediately. Rinse skin and hair with water, preferably in a shower to remove all traces of the product. Disposal of the product container(s) must comply with the regional, national and international regulations. Keep out of the reach of children. Always read the safety instructions before using the product. Do not put the product into body orifices. Keep out of the reach of individuals with mental disabilities.
Warning
Do not apply the product or leave to dry in direct sunlight.
Warning
Fluid and vapors burn easily. This product can cause severe irritation of the eyes should they come in contact with the product.
Info
If you have any questions about our products or need support, please contact us.
